3x3 SEG Backlit Lightbox U-Shape Exhibition Stand Display Kit 2

3x3 SEG Backlit Lightbox U-Shape Exhibition Stand Kit 2

This 3m x 2.4m SEG Backlit Lightbox Freestanding Corner Exhibition Backwall Kit is both visually striking and practical. Linked to create an L-Shaped corner display, this kit includes three 3000mm(W) x 2400mm(H) SEG Backlit Lightbox Display.

These high-impact fabric display stands use integrated LED lighting to highlight your advertising and branding. Ideal for exhibitions, trade shows, shell schemes and marketing events. Designed to be portable, modular, easy to store and simple to assemble without tools; making them the ideal portable backlit exhibition stand solution.

Available separately is a 1000mm x 1000mm SEG Lightbox Counter which you can purchase at an additional cost to add a finishing touch to your corner display.

3 x 3 SEG Backlit Lightbox Exhibition Stand Display Kit 2 Includes:

• 3 set 3000mm (w) x 2400mm (h) Lightbox
• 3 or 6 Printed SEG Fabric Graphics (Depending on Selection)
• 3x Blackout Fabric for Rear Panels (For Single Sided Option Only)
• 2x Standard Stabilising Feet for each frame
• 2x Half Feet (Left and Right Side)
• 6x Universal Angle Bracket
• 1x Premium Wheeled Transport Case with Foam Compartments (Per Lightbox)
• 1x SEG Backlit Counter (Optional)

Backlit LED Banner Assembly:
The panels that make up this U-shaped corner kit use quality LEDs. These LED lights are pre-installed into the 120mm-deep frame profile and offer bright but evenly diffused lighting for a cost-effective and energy-efficient LED exhibition stand. Operating on a simple plug-and-play operation, these lightboxes for exhibitions can be installed and used by anyone.

Installation and transportation is very easy. Each of the lightbox panels is supplied with its own padded Premium wheeled transport case with wheels and trolley handles. Each piece of the frame is number-coded for ease – simply match the numbers and click the pieces together using the push-fit mechanisms. No tools are required. Connect the lighting cables and hang your custom printed SEG graphics to complete assembly.

Each LED lightbox panel includes an Australian two-pin plug per light panel, as well as a 24V 200W driver. The three set 3m (w) lightboxes include 6x power packs require to run.

Custom Fabric Lightbox Printing:
Printed on one side with your customised design, each single-sided lightbox display has one printed graphic for the front of the display. The back is a blockout plain black fabric reverse that seals the frame for even backlighting. If you select the double-sided lightbox option, you will receive printed panels on the front and rear of your display. Replacement lightbox graphics can be purchased at any time allowing you to update your branding quickly and easily.

Free Artwork Check on every print file, we never print without your approval.

Why Choose the 3x3 SEG Backlit Lightbox L-Shape Exhibition Stand Display Kit 1 ?

• 3m x 2.4m U-shaped lightboxes for exhibition
• Single sided lightboxes have a blockout black blank cover reverse graphic
• Double sided SEG graphics include 2x printed panels per lightbox
• Included three free standing light boxes
• Can be linked or use a individual LED Banners
• Optional SEG Lightbox Exhibition Counter
• Guarantees your brand stands out
• Pre-installed LED Lighting for plug-and-play use
• Premium wheeled transport cases with protective foam inserts
• Power cables included
• 12-month hardware warranty

For additional information on SEG Backlit Lightbox Display For Exhibitions, please call 1300 197 088 or contact us.

View the full Wild Cow Visual range of Exhibition Lightbox Displays .

What's included in the 3×3 U-Shape Kit?

The kit includes two freestanding backlit lightboxes—Three 3m-wide panel —along with a Universal Angle Bracket to create the L-shape. It also comes with stabilising feet, custom-printed SEG fabric graphics, blackout fabric for the rear panels (for the single-sided option), and a premium wheeled transport case for each lightbox. An optional 1m × 1m SEG counter is also available.

What booth does it fit, and what are the dimensions?

It's built for a 3×3 (3m × 3m) exhibition booth, set up as an U-shaped. The stand is 3m wide across the front with a 3m return, 2.4m high, and a 120mm-deep frame profile. Total weight is 75kg (112kg with the counter).

How does the U-shape join — is it seamless?

The three wings meet at a dedicated 90° corner using Universal Angle Bracket to create the U-shape, so the frames lock at a true right angle and the SEG graphics wrap the corner cleanly with no visible gap. It reads as one continuous branded wall, not two separate panels bolted together.

Does the single-sided include a blackout fabric for the rear panel?

Yes — every single-sided SEG lightbox we supply includes a blackout rear fabric at no extra cost. While many competitors charge extra for a blackout panel or default to a standard white fabric that lets light leak out, we include it as standard. Our premium dual-sided rear fabric serves two important purposes:

• Maximum Brightness (Inward-Facing White): The inside of the rear panel is vibrant white to bounce LED light back through your front graphic, ensuring a brighter, more even illumination.
• Professional Finish (Outward-Facing Black): The outside of the rear panel is blockout black fabric to prevent light bleed, keeping your display looking clean and professional from behind.

Should I choose single-sided or double-sided printing?

Choose single-sided if the stand sits against a wall or shell scheme — you get a printed front and a blockout plain black fabric reverse that seals the frame for even backlighting. Choose double-sided for island or walkway positions where the stand is seen from both sides — you get printed graphics on the front and back of each panel.

How is it powered — do I need an electrician?

No electrician needed. Every panel is pre-wired with 24V 200W LED drivers for Australian and New Zealand power (230–240V) and runs plug-and-play from a standard power point. EACH 3m panels use two power packs included.

How is it transported and set up?

Each lightbox packs into its own Premium wheeled transport case with foam compartments. Setup is tool-free and takes two people: the frame sections are number-coded, so you match the numbers, push-fit the poles, connect the power cables, and press in the SEG graphics.

Can I rebrand it later or order replacement graphics?

Yes. The printed SEG fabric skins are fully replaceable, so you can rebrand for a new campaign or show by reordering just the graphics and keeping the same frame and cases — a fraction of the cost of a new stand.

Can you custom sizes to meet strict exhibition venue requirements?

Yes. We can custom-sized displays to meet your exhibition organiser's requirements. Many venues have strict size limits—for example, a 3×3m booth may require the display to be slightly under 3.0m wide. We can adjust the dimensions, such as manufacturing a 2.85m-wide display, to help ensure your stand complies with strict venue regulations and avoids installation issues.

Can it be used outdoors?

No — it's designed for indoor use only. The LED system and fabric graphics aren't built for weather or wind. Use it for exhibitions, trade shows, expos, showrooms and indoor events.

Do I get an artwork proof, and what warranty is included?

Every graphic is custom printed to your own artwork with a free artwork check — we send a proof and never print without your approval. The hardware is covered by a 12-month warranty on the frame, LEDs and drivers, with parts stocked in Australia.

The 3×3 U-Shape kit sets up tool-free with two people. Follow these steps:

1. Unpack the cases. Each of the three lightboxes has its own wheeled case — lay out the number-coded frame sections, feet, drivers and your SEG graphics.
2. Build each frame. Match the numbers on the frame poles and push-fit them together to form the three lightbox frames No tools required.
3. Fit the feet. Attach the stabilising and square feet to each frame, using the left and right half-feet on the outer ends for a stable base.
4. Form the U-shape. Bring the three wings together and lock them with Universal Angle Bracket brackets.
5. Connect the power. Plug each panel's 24V 200W driver into a standard Australian power point — each 3m panels use two power packs. Everything is pre-wired; just connect and switch on.
6. Fit the graphics. Press the silicone edge (welt) of each SEG fabric into the frame channel, working around the frame until it pulls tight and crease-free. Single-sided stands take a white reverse panel to seal the frame.
7. Position and finish. Move the stand into place and, if using, add the optional SEG counter.

Download the full install manual (PDF) →

Prefer to watch? See the step-by-step setup video in the panel below.