Can I order replacement fabric prints for my SEG Backlit Lightbox Display?

Yes — this is one of the big advantages of SEG. You keep the frame and case and just reorder a fresh printed fabric when you rebrand or run a new campaign. It pushes into the same frame in a minute or two, so refreshing your stand costs a fraction of a whole new display. Order replacement prints on this page by selecting the replacement-print option.

Can I use one frame at different sized venues?

Yes — because the frame is modular. You can reconfigure it to a smaller width by removing sections, then fit a replacement print made to that size. You keep the same frame system and case, so exhibiting at different-sized venues costs a fraction of buying separate displays. Tell us your venue sizes and we'll advise the right setup.

How do I attach the SEG fabric to the frame?

It's quick and tool-free. The printed fabric has a silicone strip (the "welt") sewn around its edge, and the aluminium frame has a channel running around it. You press the silicone edge into the channel by hand, working around the frame, and it pulls the graphic tight and crease-free. No Velcro, no clips, no visible fixings.

Will my existing fabric fit, or can I move a graphic between frames?

Our SEG graphics are made to suit our frames, so the safest fit is fabric printed for the same frame size and brand. SEG channel and welt sizes vary between manufacturers, so a graphic from another brand's frame may not seat correctly. If you're replacing fabric for a frame you bought elsewhere, send us the frame brand and size and we'll confirm fit before you order.

Can the SEG Backlit Lightbox Display be used outdoors?

No — it's designed for indoor use only. The LED lighting system and fabric graphic aren't built for weather or wind. Use it for trade shows, expos, showrooms, retail and indoor events.

Why is the back of my single-sided display blank white?

That's intentional and needed for backlighting. For the light to glow evenly through the front graphic, both sides of the frame must be closed. On a single-sided order you still receive a blank white fabric for the back — it seals the frame so the front print lights up bright and even. Choose double-sided if you want artwork on both faces.

Can I clean the SEG fabric if it gets marked?

Spot-clean gently with cold water and a damp sponge, then dry in the shade — not in direct sun or a dryer. Reinsert the fabric into the frame while slightly damp to pull out any creases.

I have multiple designs — are there extra setup costs?

Your price covers print for the artwork you supply. If you need several different graphics — say different fabrics for different shows on the same frame — each design is printed as its own job. Tell us how many sizes and how many designs you need and we'll quote it clearly upfront, no surprises.

How is the display packed and transported?

Every set includes a wheeled hard case as standard — not a flimsy carry bag. The frame sections, LED system and folded fabric pack into the case for safe transport and storage, so it travels cleanly show after show.

What sizes are available?

Standard SEG Backlit Lightbox Displays are available from 1m up to 6m wide, all at 2.4m high. Every size ships with a wheeled hard case and LED system as standard. Need bigger? Custom sizes beyond 6m wide or taller than 2.4m are made to order — just contact us.

1 18

SEG Backlit Lightbox Replacement Fabric

Q: Do you print to my design, and do I get a proof first?

Yes. Every graphic is custom printed to your own artwork, edge to edge, by dye-sublimation. We send a proof before we print so you can sign off on layout, colour and sizing — nothing goes to production until you're happy.

Need a size that isn't listed? We print almost any dimension — contact us for a custom quote.

Product variants

$265.00

Sale Sold out

Tax included. Shipping calculated at checkout.

Quantity

📩 After ordering, email your print-ready artwork to enquiry@wildcowvisual.com.au — we will send you a proof before we print.

Proof Send before print
Fast Turnaround
Fast Dispatch

SEG Backlit Lightbox Replacement Fabric is a custom-printed silicone-edge graphic (SEG) that replaces the printed skin on your existing backlit lightbox frame. Keep the frame, LED and case you already own — reorder just the fabric to rebrand or refresh.

Keep your frame, refresh the graphic — rebrand for a fraction of a whole new display
Dye-sublimation, edge-to-edge — crease-free, seamless, frameless finish
Push-fit silicone welt — fits your Wild Cow SEG backlit frame, tool-free
Sizes 1m–9m wide at 2.4m high — standard range
Any size, custom made — any dimension, including skins for frames bought elsewhere; send us your size and frame spec and we'll match it
Backlit-grade fabric — glows evenly, no hotspots
Proof before print — you sign off before anything goes to production

Explore: the SEG Backlit Lightbox Display (the frame this fits) · artwork templates & print specs

View full details

Overview

Silicone Edge Graphic (SEG): dye-sublimation printed fabric with a sewn-in silicone welt that locks into your lightbox frame's channel for a drum-tight, edge-to-edge finish — no visible frame, just your graphic.
Backlit-grade fabric: translucent fabric made for illuminated lightbox frames — the LED light glows evenly through your artwork with no hotspots or dark edges.
Custom printed to your design: full-colour, edge to edge, in your own artwork. We send a proof before printing — what you approve is what you get.
Replacement made easy: already own the frame? Just re-skin it. Order a fresh fabric for a new campaign, a rebrand, or to replace a damaged graphic — no need to buy a new frame.
Fits standard SEG frames: our 3mm × 13mm silicone welt seats in any channel with a 4.5mm slot and 14mm+ depth — including Wild Cow Visual frames plus ReFrame, RexFrame, FabFrame, Matrix Frame, Selbys Fabric Frames and Vivad Stretch Frames. Send us your frame details and we'll confirm.
Why Wild Cow Visual: custom printed to your design, local stock, fast turnaround, proof before we print.

FAQ

Will this replacement fabric fit my existing frame?

Most likely, yes. Our SEG fabric has a 3mm × 13mm sewn silicone welt that fits any standard frame with a 4.5mm slot and at least 14mm depth — including Wild Cow Visual frames, plus ReFrame, RexFrame, FabFrame, Matrix Frame, Selbys Fabric Frames and Vivad Stretch Frames. If you're unsure, send us your frame brand and size and we'll confirm before you order.

Is the fabric made for backlighting?

Yes — it's backlit-grade translucent SEG fabric, so the LED light glows evenly through your artwork with no hotspots or dark edges. It's made for illuminated lightbox frames.

How much does replacement SEG fabric cost in Australia?

Replacement prints run from $265 for a 1m × 2.4m skin up to $2,700 for a 9m × 2.4m skin, with sizes at 1m, 2.4m, 3m, 4m, 5m, 6m and 9m wide. Custom sizes are quoted on request. Buy 2 or more and save 5%.

Which size do I order?

Order the print to match your frame's width — a 3m frame takes a 3m × 2.4m print, from 1m up to 9m. Every standard print is 2.4m high. Tell us your frame width or send a photo and we'll confirm. Need something outside the range? We custom-print to any size.

Do you print to my design, and do I get a proof first?

Yes. Every print is custom to your artwork, edge to edge, by dye-sublimation. We send a proof before printing so you sign off on layout, colour and sizing — nothing goes to production until you're happy.

How do I fit the fabric to the frame?

It's tool-free. The printed fabric has a silicone strip (the welt) sewn around its edge; your frame has a matching channel. Press the welt into the channel by hand, working around the frame, and it pulls the graphic tight and crease-free.

Can I order more than one print and save?

Yes — buy 2 or more prints and save 5%, whether it's several designs for different shows or fabrics for more than one frame.

Can I clean the fabric?

Spot-clean gently with cold water and a damp sponge, then dry in the shade (not direct sun or a dryer). Reinsert while slightly damp to pull out any creases.

Do you offer custom sizes?

Yes — we print replacement skins to any dimension, not just the standard 1m–9m widths, including skins for frames bought elsewhere. Send us your size and, if it isn't one of ours, the frame's slot and depth, and we'll match it.

Specifications

Product: Replacement tension fabric graphic (fabric only — frame not included)
Type: Silicone Edge Graphic (SEG) with sewn silicone welt
Welt: 3mm thick × 13mm silicone edge — fits any standard frame with a 4.5mm slot width and minimum 14mm depth
Finish: Backlit (translucent, for illuminated lightbox frames)
Print: Dye-sublimation, full-colour, edge to edge
Material: Tension display polyester fabric
Artwork: Supplied to your design; proof provided before printing
Compatibility: Wild Cow Visual SEG frames, plus ReFrame, RexFrame, FabFrame, Matrix Frame, Selbys Fabric Frames and Vivad Stretch Frames
Sizes: Made to your frame size — choose below or contact us for custom