Backlit SEG Lightbox Displays

Stand out for all the right reasons

Choose your format and size below. Ultra-bright SEG backlit displays, custom printed to your design. Made to order, ready in 7–8 working days from artwork approval.

Which backlit format do you need?

Most of these use the SEG system — a printed fabric skin with a silicone edge that pushes into a channel around an LED-lit frame. The towers, cubes and columns use a tube frame with the fabric sleeved over it instead. The difference is how each one stands and where it lives.

Format Best for How it's set up
SEG Backlit Lightbox Display Exhibitions, trade shows, foyers, showrooms Freestanding on feet, moves between events
RGB LED Lightbox Display Stands that need to be seen across the hall, or a new look for each event Freestanding on feet, backlit graphic plus a colour-changing lit edge
SEG Backlit Wall-Mounted Display Reception walls, retail, permanent fitouts Fixed flat to the wall
SEG Backlit Pop Up Media Wall Back walls on 3x3 and 6x3 exhibition booths Collapsible frame, packs into a wheeled case
SEG Lightbox Counters Exhibition stands, reception desks, sampling, demos Freestanding, lit front panel, standard or RGB edge
Backlit Towers, Cubes & Columns Seen from every side — atriums, festivals, open floor Tube frame, fabric sleeved over, printed on every face
Replacement Fabric You already own an SEG frame — tube and column reprints, contact us New skin, same frame

See our work → real SEG backlit lightbox displays we've printed and delivered for Australian exhibitions, trade shows and expos.

Frequently Asked Questions

Should I choose single-sided or double-sided?

Choose single-sided when the display sits against a wall or a booth panel. It includes a blockout fabric backing as standard at no extra cost, so no light or shadow shows through the back. Choose double-sided when people approach from both directions — island stands, walkways, and anywhere the display isn't against a wall.

Can I reuse the frame and just reprint the graphic?

Yes. The SEG frames in this range take a replaceable silicone edge fabric skin, so a rebrand or a new campaign means ordering the fabric only. You keep the frame, the LED bars and the case. For tower, cube and column reprints, contact us. See SEG Backlit Lightbox Replacement Fabric or SEG Backlit Pop Up Replacement Fabric.

Do I need a single display or a full booth kit?

A single display suits one wall, a foyer or a reception area. If you're fitting out a complete 3x3 or 6x3 exhibition booth with a back wall, wings and counters, the Backlit Exhibition Kits collection is built for that.

How are SEG backlit displays delivered?

Delivered Australia-wide from our Campbelltown NSW workshop, with freight charged by state. Pickup isn't available. Lightbox walls and the RGB counter ship in a wheeled hard case, the standard counter in a padded carry bag, and the printed fabric packs flat.