RGB LED Lightbox Display

The RGB LED Lightbox Display is a freestanding, LED-backlit SEG fabric wall with a lit aluminium edge that changes colour from a handheld remote. Your printed graphic glows from behind, just like our standard SEG backlit lightbox, and the lit frame edge adds a band of colour around it. Available 1m, 2m, 3m and 6m wide.

Why it stands out

• Two light sources in one frame: the backlit fabric graphic, plus a colour-changing RGB edge around it
• Change the edge colour to suit your brand, the event or the season, straight from the remote
• Seamless SEG fabric pressed into the frame for a crease-free, edge-to-edge finish
• Lightweight aluminium frame with push-fit joints, no tools needed
• Single-sided with a blockout back as standard, or double-sided
• Wheeled transport case included with every size
• Replaceable graphics: keep the frame, reorder just the fabric

What's included

Aluminium frame with RGB LED edge · LED backlight system and power supply · remote control · your custom-printed SEG fabric graphic · wheeled transport case.

RGB or standard backlit?

Choose RGB when you want the stand noticed from across a hall, or want to change its look between events: launch colours one week, a client's brand the next. If you only need your graphic lit, the SEG Backlit Lightbox Display does that in more sizes, for less.

Pair it with a counter

The SEG Lightbox Counter comes with the same RGB edge, so the wall and counter can run the same colour. A set saving applies automatically in the cart when you buy both.

Why Wild Cow Visual

A Sydney backlit display specialist since 2013, supplying councils, universities and corporates. Every graphic is proofed before we print, and replacement prints are made to fit your frame.

Match it with the SEG Lightbox Counter with RGB edge, compare the SEG Backlit Lightbox Display, or build a full stand with our SEG Backlit Exhibition Stand Kits.

What is an RGB LED lightbox?

It's a freestanding lightbox with two sets of lights. An LED backlight sits behind your printed fabric so the graphic glows, and RGB LEDs in the frame edge change colour. From the front you see your graphic lit up, framed by a band of colour you control.

Can the edge match my exact brand colour?

The remote gives you a set range of colours, plus effects and brightness control. That gets close to most brand colours, but we don't promise an exact Pantone match on the edge. Your printed graphic is colour-matched as normal. If the edge colour matters for your event, ask us and we'll send a short video of the colour options.

Can I keep the edge on one colour?

Yes. Set the edge to a single steady colour and it stays that way all day. The moving effects are there if you want them for a launch or evening event, not something you have to use.

Single-sided or double-sided?

Single-sided comes with a blockout back as standard, so nothing shows through from behind and the back looks clean. Choose double-sided for island booths and walkways where people see both faces.

Which size suits my booth?

The 1m x 2m suits counters, foyers and tight spaces. The 2m x 2.5m suits a smaller booth, a side wall or a showroom feature. The 3m x 2.5m is the back wall of a standard 3m x 3m booth, and the 6m x 2.5m fills the back of a 6m x 3m booth or works as a feature wall. The 2m, 3m and 6m stand 2.5m high, and some halls cap stands at 2.4m, so check your exhibitor manual before you order.

Is there a matching counter?

Yes. The SEG Lightbox Counter comes with the same RGB edge, so your wall and counter can run the same colour at every event. A set saving applies automatically in the cart when you buy a wall and counter together.

How is it powered? Do I need an electrician?

No electrician needed. It plugs into a standard 240V power point, and the power supply is included.

How does it set up?

The aluminium frame pushes together by hand, with no tools. The printed fabric has a silicone edge that presses into a channel around the frame, pulling the graphic tight and crease-free. Two people make the 2m, 3m and 6m easier to stand up.

Can I order replacement graphics?

Yes. Keep the frame, case and lights, and reorder just the printed fabric when your branding or campaign changes. Contact us for replacement print pricing.

Can it be used outdoors?

No. It's built for indoor use only: trade shows, expos, showrooms, foyers and retail.

What is the lead time?

Production is 7–8 working days from artwork approval, plus freight. Tell us your event date when you order and we'll confirm delivery before you pay. Working to a tight deadline? Call 1300 197 088 before you order.

Do I get a proof before printing?

Yes. Every graphic is printed to your own artwork, and we send a proof for your approval first. Nothing goes to print until you're happy.

What is the warranty?

12 months on the frame, LED system and hardware. Printed graphics are excluded, as they're custom made to your artwork.