What's included in the 6×3 U-Shape Kit?
The kit includes three freestanding backlit lightboxes — one 6m-wide back wall and two 3m-wide returns — with Universal Angle Brackets and hidden L-shape connectors (top and bottom) for both corners. It also comes with stabilising feet, custom-printed SEG fabric graphics, blockout fabric for the rear panels (single-sided option), eight 24V drivers and hard trolley cases. An optional 1m × 1m SEG counter is available above.
What booth does it fit, and what are the dimensions?
It's built for a 6×3 (6m × 3m) exhibition booth with the open side facing the aisle. The stand is 6m wide across the back with a 3m return on each side, 2.4m high, with a 120mm-deep frame profile. Total weight is about 118kg (133kg with the counter).
How do the two corners join — are they seamless?
Each 3m return meets the 6m back wall at a dedicated 90° corner using Universal Angle Brackets plus hidden L-shape connectors (top and bottom). The hidden connectors sit under both walls as a shared base at each corner, so the frames lock at a true right angle and the SEG graphics wrap each corner with no visible gap. It reads as one continuous branded booth, not three panels bolted together.
Does the single-sided include a blockout fabric for the rear panel?
Yes — every single-sided SEG lightbox we supply includes a blockout rear fabric at no extra cost. The inside face is white to bounce LED light back through your front graphic for brighter, more even illumination; the outside face is blockout black to stop light bleed, so the booth looks clean from behind and from your neighbours' side.
Should I choose single-sided or double-sided printing?
Choose single-sided if the backs of the walls face a wall, shell scheme or another stand — you get a printed front and a blockout black reverse. Choose double-sided for peninsula or island positions where the outside of the returns is seen from the aisle — you get printed graphics on the front and back of each wall.
How is it powered — do I need an electrician?
No electrician needed. Every panel is pre-wired with 24V 200W LED drivers for Australian and New Zealand power (230–240V) and runs plug-and-play from a standard power point. The 6m lightbox uses four power packs and each 3m lightbox uses two — eight in total, all included.
How is it transported and set up?
Each lightbox packs into its own hard trolley case. Setup is tool-free and takes two people: the frame sections are number-coded, so you match the numbers, push-fit the poles, lock the two corners, connect the power cables and press in the SEG graphics.
Is the hard trolley case included, or is it a paid extra?
Included as standard — no upgrade needed. Some suppliers only provide a soft carry bag or charge extra for a hard case; every Wild Cow SEG backlit kit ships with hard trolley cases as standard.
Can I rebrand it later or order replacement graphics?
Yes. The printed SEG fabric skins are fully replaceable, so you can rebrand for a new campaign or show by reordering just the graphics and keeping the same frames and cases — a fraction of the cost of a new stand.
Can you custom-size to meet strict exhibition venue requirements?
Yes. Many venues set the booth size as the outside dimension, so a 6×3m booth may need a back wall slightly under 6.0m and returns under 3.0m. We can manufacture, for example, a 5.85m back wall with 2.9m returns so your stand fits the space and passes the organiser's checks.
Can it be used outdoors?
No — it's designed for indoor use only. The LED system and fabric graphics aren't built for weather or wind. Use it for exhibitions, trade shows, congresses, showrooms and indoor events.
Do I get an artwork proof, and what warranty is included?
Every graphic is custom printed to your own artwork with a free artwork check — we send a proof and never print without your approval. The hardware is covered by a 12-month warranty on the frame, LEDs and drivers, with parts stocked in Australia.
