6x3 Tower Fabric Tube Exhibition Stand – Spire

Height is the one thing your neighbours can't block

On an exhibition floor, the stands either side of you are competing for the same eye line. Everything at 2.3m gets lost in the same visual noise. The Spire's tower goes to 3.2m - taller than anything else we build - on a footprint just one metre wide. It costs you almost no floor space and puts your name above the row.

Below it, two 2.4m panels form a 2.3m wall that does the work at eye level, where people actually read. It's a simple division of labour: the tower brings them over, the wall tells them why they should care.

Five spotlights is the most lighting on any stand we sell, which matters more than it sounds. Exhibition halls are lit for safety, not for your graphics - the difference between a lit stand and an unlit one is the difference between looking finished and looking flat.

Every frame is bungee-corded aluminium tube that pushes together by hand, and the whole stand travels in soft nylon bags. No crew, no crate, no forklift.

The fabric is matte dye-sublimated 260gsm polyester, so it soaks up harsh overhead lighting instead of bouncing it back. Your brand photographs crisp rather than washed out with glare.

Check your venue height limit

At 3.2m the tower exceeds the cap at some venues, particularly for inline booths. Ask your organiser what height you're allowed before you order - and if you're not sure, call 1300 197 088 and we'll work it out with you. It's a five-minute check that saves a very expensive surprise on build day.

Which 6m stand?

Spire is the tallest - choose it when being seen over the row is the problem. Contour reaches 2.9m with two curved towers instead of one. Meridian and Ascent add a second screen and second shelf stand if you need two full stations. Crown puts a canopy over a product display, and Crest, Beacon and Vantage are single-counter stands at the lower end of the range.

Perfect For

• 6m x 3m inline booth allotments in large halls
• Stands hemmed in by taller or busier neighbours
• Brands whose name or logo has to be readable from a distance
• Two-person stands needing a reception and a demo point
• Conferences, expos and trade fairs

What's Included

• 1 x tower fabric panel - 1m W x 3.2m H
• 2 x straight fabric panels - 2.4m W x 2.3m H
• 5 x custom-printed fabric graphics, each with a cotton bag
• 2 x rectangle fabric display counters - assembled 940mm W x 1000mm H x 455mm D
• 1 x TV mount - supports screens up to 23 inches
• 1 x shelf stand - 28cm W x 50cm L x 90cm H
• 5 x spotlights
• Soft nylon carry bags

Furniture shown in the photographs - chairs, tables and stools - is for display only and is not included. The television is not supplied (mount only).

Printing is single-sided with a neutral white reverse. Double-sided is available on request - call 1300 197 088.

Optional Add-Ons

• Tablet and brochure holder - for demos and literature
• Extra shelf stands - 28cm W x 50cm L x 90cm H - $119 inc GST per set
• Extra fabric display counters - square, triangle or oval
• Fabric tower displays - add a second tower or fill a corner
• All display accessories

Call 1300 197 088 or email enquiry@wildcowvisual.com.au to add any of these to your order.

Will 3.2m be allowed at my venue?

Check before you order. Many Australian venues cap inline stand height at around 2.5m to 3m, and some allow more. Ask your show organiser what your booth is permitted, or call 1300 197 088 and we'll help you confirm. This is the one question worth answering before you buy - a tower you can't put up is an expensive lesson.

Why a tall tower instead of a taller wall?

Because height only needs to carry one thing - your name. A 1m wide tower at 3.2m puts that above the row of stands either side of you, and it does it on a footprint you'd barely notice. Making the whole wall taller would cost far more in fabric and frame for no extra visibility, since nobody reads detail at that height anyway.

Are the chairs and furniture in the photos included?

No. The photographs are styled to show the stand in use, so any furniture you can see - chairs, tables, stools - is display only and not part of the kit. What you receive is listed in full under What's Included. The television isn't included either; we supply the mount.

Why five spotlights?

Four across the wall and one for the tower. Exhibition halls are lit for safety rather than for your graphics, so an unlit stand looks flat next to a lit one - and the tower in particular is wasted if it's in shadow above the hall lighting.

Two counters but only one screen and one shelf stand - why?

The two counters let two people work without queueing, which is the part that costs you leads. A second screen and second shelf stand are useful less often, so they're not built into the price. If you want them, the Meridian and Ascent include both, or we can add them to this order - call 1300 197 088.

Is the tower stable at that height?

Yes, indoors. It uses the same steel-based bungee-corded frame as the rest of the stand and is light for its size. It isn't built for exposed outdoor positions or windy sites.

Can I get double-sided printing?

The listed price is for single-sided printing with a neutral white reverse. Worth asking about for the tower in particular - at 3.2m it's visible from behind and from the aisles either side, so a blank reverse is a missed opportunity. Call 1300 197 088 and we'll quote it.

Can I add a tablet or brochure holder?

Yes - see our tablet and brochure stands. They're ordered separately so you only pay for one if your stand needs it.

Can one person set it up?

The wall, yes. The 3.2m tower is easier with two people - one to steady it while the top sections lock in. No tools are needed either way, and the whole stand travels in soft nylon bags rather than a crate.

How do the graphics attach?

Each printed graphic slips over its frame like a sleeve and zips closed at the base, pulling the fabric tight and crease-free. No Velcro, no clips, no visible fixings.

Will the fabric show glare in photos?

No. The dye-sublimated fabric is matte by design, so it absorbs harsh overhead hall lighting instead of reflecting it. Your booth photographs crisp and clean.

Can I reuse the frames with new graphics?

Yes. The aluminium frames are built for repeated use - when your branding changes, order replacement graphic skins and keep the frames. It's a fraction of the cost of a new stand.

How is the fabric cleaned?

The 260gsm polyester fabric is machine washable - cold wash on a gentle cycle, or spot-clean with cold water and a damp sponge. Dry in the shade, not in a dryer or direct sun, and refit while slightly damp to pull out creases.

Will I receive an artwork proof before printing?

Yes. We email a digital proof for approval before production begins - nothing goes to print until you're happy.

What warranty is included?

A 12-month manufacturer's warranty covers the aluminium frame and hardware against manufacturing defects under normal use. It does not cover printed graphics, accidental damage or normal wear.